Emergency and leaks
Plumbing emergencies in Raleigh, handled day or night
Water is coming through a ceiling, a toilet is backing up into the tub, or the house has no water at all, and you need a plumber at the door tonight.

First step on arrival: call and shut off
Most plumbing emergencies give you a few minutes before the damage gets expensive, and what you do in those minutes matters. Shut the main valve if water is moving where it should not be, turn off power to the water heater if it is leaking, and stop running fixtures if a drain is backing up. Then call (919) 557-9058. Serenity Plumbing answers 24/7, including holidays, and sends one of our own plumbers out from Raleigh.
An emergency visit is about stopping damage first and making a lasting repair second. Other times the plumber makes the home safe and dry tonight, then comes back with the right parts for a bigger job such as a water heater replacement or a new sewer line section. You will know which kind of night it is before any work starts.
When a plumbing problem cannot wait until morning
Water you cannot stop
A pipe or fitting is spraying, the fixture valve does nothing, and only the main shut-off is holding the water back.
Sewage coming up
Wastewater rising in a tub, shower or floor drain means the main line is blocked, and every flush makes it worse.
No water anywhere
Every faucet in the house is dry, which can point to a failed main valve, a broken service line or a frozen pipe.
Leaking water heater
Water pooling under the tank or a T&P valve discharging steadily needs attention before the pan overflows into flooring or drywall.
Gas smell near appliances
Leave the house first and call the gas utility from outside, then call us for the gas line repair once it is safe.
Water through a ceiling
A stain that keeps growing or dripping below a bathroom usually means a supply line, drain joint or shower valve has failed.
How our plumbers handle an emergency call
When you call, the person who answers asks a short set of questions: where the water is, whether you found the main shut-off, and whether anyone in the house has a medical or access concern. If you cannot find or turn the valve, we talk you through the likely spots, which in Raleigh homes are often near the water heater, in a front crawl space or at the meter box by the street. Then a plumber is on the way.
On arrival, the plumber confirms the water is off and the area is safe, checks for water near outlets or the electrical panel, and finds the actual source. A wet ceiling can come from a drain, a supply line or a shower valve, and guessing wrong means cutting more drywall than needed. Moisture readings and a short pressure test usually settle the question within the first half hour.

The repair itself is matched to the failure. A cracked fitting gets cut out and replaced with new pipe, a blocked main gets cleared with a cable or jetter, and a dead shut-off valve gets swapped so you can control your water again. Before the plumber leaves, water is restored where possible, the repair is checked under full pressure, and you hear what failed.
How the job goes
Call and shut off
Phone us and, if you can, close the main valve or the fixture valve. We stay on the line to help you find it if needed.
Plumber dispatched
One of our own plumbers heads out from Raleigh with common emergency parts, and you get a realistic arrival window instead of a vague promise.
Find the source
The plumber traces the water or the blockage to the actual failure, using moisture readings, pressure checks or a drain camera when needed.
Stop the damage
The failed section is isolated or repaired so the house is dry and usable, and you approve the price before the work begins.
Restore and explain
Water is turned back on, the repair is tested under pressure, and you hear what caused it and what, if anything, should be done next.
Why emergency calls look different across the Triangle
The kind of emergency a Raleigh home has depends a lot on when it was built. In older neighborhoods like Oakwood and Five Points, the late night calls tend to be cast iron drains that finally cracked or clay sewer laterals packed with roots from mature street trees. Homes from the late 1970s to mid 1990s often still have gray polybutylene supply lines, and those tend to fail at the fittings without much warning.
Weather drives the rest. A hard January freeze splits pipes in crawl spaces and on exterior walls across Wake and Johnston counties. Summer storms and the remnants of tropical systems push heavy rain into older sewer systems, which can cause backups in low spots. In rural parts of Franklin, Chatham and Harnett counties, a no-water call often traces back to the well system or pressure tank, so the plumber checks the house side first.
What an emergency plumbing visit typically costs
| Job | Typical range |
|---|---|
| After-hours service call and diagnosis | $137 to $289 |
| Supply line or fitting repair | $218 to $476 |
| Main line clog cleared by cable | $264 to $517 |
| Burst pipe section replaced in a crawl space | $389 to $912 |
Access is the biggest variable: a pipe behind finished drywall or under a slab costs more than one in an open crawl space. You hear the price before work starts. See every range in our plumbing cost guide.
Questions about emergency plumbing
Should I turn off my water before calling a plumber at night?
Yes, if water is leaking where it should not be. Closing the main valve stops the damage from growing while the plumber is on the way. If the water heater is involved, also shut off its breaker, or turn a gas unit to its pilot setting.
Do you charge more for emergency calls on weekends and holidays?
An after-hours visit usually carries a higher service call than a weekday appointment. The repair itself is priced on the work involved. We tell you the service call when you phone and give you the repair price after the plumber has seen the problem, before any work begins.
What counts as a real plumbing emergency versus something that can wait?
Anything that is actively damaging the house or leaves you without a working toilet or water supply is worth a call right away. That includes uncontrolled leaks, sewage backups, a leaking water heater and no water at all. A dripping faucet, a slow drain or a running toilet can usually wait for a daytime visit, which costs less.
Can a plumber fix everything in one emergency visit?
Often, yes. Most leaks, valve failures and clogs are repaired on the first trip. Larger work such as replacing a sewer section, a water heater or a long run of failed pipe may need parts, a permit or more time. In those cases the plumber makes the home safe and usable that night and sets up the full repair with you.
Related
Related plumbing services
Burst Pipe Repair
A pipe has split, water is spraying or pouring into the house, and you need it stopped and repaired before the floors...
Learn moreMain Line Clog Clearing
Sewage is coming up in the lowest tub or shower, toilets gurgle when the washer drains, and every fixture in the house...
Learn moreWater Heater Repair
The shower ran cold this morning, the tank is making popping noises, or there is a puddle forming around the base of...
Learn moreMain Shut-Off Valve Replacement
A pipe is leaking and the main water valve will not turn, only turns partway, or drips from the stem every time you...
Learn morePlumbing problem right now?
Call and a person answers, day or night. A plumber from our downtown Raleigh office comes to you.