Skip to content
Serenity Plumbing CoRaleigh, NC plumbersAnswered 24/7(919) 557-9058

Commercial plumbing

Commercial plumbing for Raleigh offices, restaurants and retail

A restroom is out of service, the grease interceptor is backing up into the kitchen, or a tenant is calling about a leak, and the business has to keep running.

Commercial kitchen drain service at a downtown Raleigh restaurant

First step on arrival: call and describe

Commercial plumbing is less about one fixture and more about keeping a building open. A restaurant cannot serve with a backed up floor drain, an office cannot run with every restroom down, and a retail tenant will not wait a week for hot water. The systems are bigger, the codes are stricter, and there is usually someone, a landlord, an inspector or a franchise standard, who needs it done correctly and documented.

Serenity Plumbing handles commercial work in Raleigh and the Triangle with its own plumbers, for restaurant owners, office managers, retail tenants and property management companies. We work on grease interceptors and traps, backflow assemblies, restroom fixtures and flush valves, commercial water heaters, drain and sewer lines, and the leaks that show up in multi-tenant buildings. We answer 24/7, so a problem at 11 at night gets a plumber, not a voicemail.

Common commercial calls we handle

Grease interceptor backing up

Slow kitchen drains or grease odors near the dish area mean the interceptor is full or its outlet line is coated.

Restroom fixtures failing

Running flush valves, sensor faucets that will not shut off and clogged urinals are daily issues in busy commercial restrooms.

Backflow test due

Restaurants, offices and retail spaces often have RPZ or double check assemblies that need annual testing and reporting to the utility.

No hot water

Commercial tank and tankless heaters serving kitchens or many restrooms need fast diagnosis to meet health and tenant requirements.

Leak between floors

Water appearing on a ceiling tile in a multi-tenant building needs tracing to its source before it spreads to other suites.

Tenant build-out plumbing

New restrooms, break rooms, salon sinks or kitchen lines for a tenant upfit need permitted rough-in and final inspection.

How we work with businesses and property managers

Commercial calls start with access and timing. We confirm who will meet the plumber, where the shutoffs and cleanouts are, and when work can happen without stopping your business. Plenty of restaurant work happens before opening or after close, and office work often happens after hours or on weekends. Property managers get a clear note on each visit: what was found, what was done, and what still needs a decision.

Restaurant kitchens get interceptor and trap service, hydro jetting of grease-lined drains, and repairs to floor drains, prep sinks and three-compartment sinks. Restrooms get flush valve rebuilds, sensor faucet and flushometer repairs, wax ring and carrier work on wall-hung toilets, and stoppage clearing. We service commercial gas and electric water heaters and replace them with permits and inspection when needed.

Commercial Plumbing work in a Raleigh home

Backflow is a regular part of commercial work. We test RPZ and double check assemblies on domestic, irrigation and fire lines and send the results to the City of Raleigh or the serving utility, repair failed assemblies, and install new ones when a change in use calls for it. For buildings with several assemblies, we can test them all in one visit and keep a single record for the property file.

How the job goes

01

Call and describe

Tell us the address, the problem, who will meet us and any hours we need to avoid so the visit fits your operation.

02

Locate and protect

We find shutoffs and cleanouts, protect floors and customer areas, and isolate the problem so the rest of the building keeps running.

03

Diagnose the cause

We find out whether it is a fixture, a branch line, the interceptor or the main, using a camera on drain lines when needed.

04

Repair and test

Repairs are made with commercial-grade parts, and then the fixtures, drains and assemblies are tested under normal operating conditions.

05

Document the visit

You or your property manager get a written summary of what was found and done, and any follow-up the building needs.

Commercial plumbing in Raleigh's business districts

Downtown Raleigh mixes newer office towers with older brick buildings on and around Fayetteville Street, and the older ones often have cast iron drains and galvanized supply lines behind their renovated storefronts. Restaurants along Glenwood South and in the Warehouse District run heavy grease loads. The City of Raleigh operates a fats, oils and grease program for food service businesses, so interceptor maintenance and records matter for staying in good standing.

Outside downtown, we serve office parks around North Hills and Brier Creek, strip retail along Capital Boulevard and Glenwood Avenue, and medical and professional buildings in Cary, Morrisville and Durham. Property managers with several sites like having one plumbing company that knows each building. Every call starts the same way, by phone, and we can set up a recurring schedule for backflow testing and interceptor checks so deadlines never slip.

Typical commercial plumbing costs

JobTypical range
Restroom flush valve rebuild, per fixture$143 to $268
Kitchen drain clearing with jetting$387 to $743
Grease trap service and outlet line cleaning$264 to $587
Commercial backflow test, per assembly$94 to $173
Commercial tank water heater replacement$3,286 to $7,148
After-hours emergency service visit$237 to $418

Building size, access, after-hours timing, fixture brand and the size of the system involved drive commercial pricing. A plumber gives the actual figure after seeing the site. See every range in our plumbing cost guide.

Questions about commercial plumbing

Can you work around our business hours?

Yes. We schedule restaurant work before opening or after close whenever possible, and office or retail work in the evening or on weekends. For true emergencies, like a flooding restroom or a dead kitchen water heater, we answer 24/7 and send a plumber right away. Tell us your hours when you call and we will plan the work so customers notice as little as possible.

How often should a restaurant grease interceptor be serviced?

It depends on the size of the interceptor and how much grease the kitchen produces. Busy kitchens may need service monthly, while small cafes with large interceptors can go longer. A common rule of thumb is to pump before grease and solids fill about a quarter of the volume. The City of Raleigh's grease program also sets record-keeping expectations for food service businesses.

Do you work with property management companies?

We do, and we keep it simple. Each building gets one point of contact on our side, every visit ends with a short written summary for your file, and we can test all backflow assemblies at your properties on one schedule. Your maintenance staff or tenants call us directly, and we keep you informed of what was found and what it cost.

Can you handle plumbing for a tenant upfit?

Yes. For a new restaurant, salon, clinic or office suite, we lay out drains, vents and supply lines to match the plans, pull the plumbing permit, schedule inspections and set fixtures at the end. If the new use requires a different backflow assembly or a grease interceptor, we include that. Give us a call at (919) 557-9058 with the address and the plans.

Plumbing problem right now?

Call and a person answers, day or night. A plumber from our downtown Raleigh office comes to you.

Call (919) 557-9058
Call (919) 557-9058 · 24/7